Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/TrueType" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/local/psfonts" FontPath "/usr/local/psfonts/bsr" FontPath "/usr/local/share/ghostscript/fonts" FontPath "/usr/X11R6/lib/X11/fonts/fake-helv" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/extra" # FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Module section -- this is an optional section which is used to specify # which run-time loadable modules to load when the X server starts up. # ********************************************************************** Section "Module" # This loads the DBE extension module. Load "dbe" Load "type1" Load "freetype" # Load "dbe" # Load "glx" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" EndSubSection EndSection # ********************************************************************** # Server flags section. This contains various server-wide Options. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # Option "DontZoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # Set the basic blanking screen saver timeout. Option "blank time" "10" # 10 minutes # Set the DPMS timeouts. These are set here because they are global # rather than screen-specific. These settings alone don't enable DPMS. # It is enabled per-screen (or per-monitor), and even then only when # the driver supports it. Option "blank time" "10" Option "standby time" "20" Option "suspend time" "30" Option "off time" "60" # On some platform the server needs to estimate the sizes of PCI # memory and pio ranges. This is done by assuming that PCI ranges # don't overlap. Some broken BIOSes tend to set ranges of inactive # devices wrong. Here one can adjust how aggressive the assumptions # should be. Default is 0. # Option "EstimateSizesAggresively" "0" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment # out the above line, and uncomment the following line. # Option "Protocol" "Xqueue" # Set the keyboard auto repeat parameters. Not all platforms implement # this. # Option "AutoRepeat" "500 5" # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a European # keyboard, you will probably want to use one of: # # Option "XkbModel" "pc102" # Option "XkbModel" "pc105" # # These are the default XKB settings for XFree86 # # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse 1" Driver "mouse" # The mouse protocol and device. The device is normally set to /dev/mouse, # which is usually a symbolic link to the real device. Option "Protocol" "PS/2" Option "Device" "/dev/mouse" # Emulate3Buttons is an option for 2-button mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" EndSection # ********************************************************************** # Monitor section # ********************************************************************** Section "Monitor" Identifier "ThinkPad_LCD" VendorName "IBM" ModelName "390e" Option "DPMS" HorizSync 30-95 VertRefresh 50-160 # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync Modeline "1024x768m" 85 1024 1032 1152 1360 768 784 787 823 EndSection Section "Device" Identifier "NeoMagic" Driver "neomagic" Option "intern_disp" # Option "extern_disp" EndSection # ********************************************************************** # Screen sections. # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "NeoMagic" Monitor "ThinkPad_LCD" Option "intern_disp" DefaultDepth 16 Subsection "Display" Depth 16 Modes "1024x768" "1024x768m" "800x600" EndSubsection Subsection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 32 Modes "800x600" "640x480" EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Main Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". In this example, "Mouse1" is the core pointer, # and "Mouse2" is an extended input device that also generates core # pointer events (i.e., both mice will move the standard pointer). InputDevice "Mouse 1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection